enervent eWind LTR-2, Инструкция по установке

Страница: 33 / 96

33
Installation instructions
EN
Replacing filters
Replacing filters (generic view)
NOTE:
Vacuum the inside of the unit for better
performance and cleaner indoor air.
Bag filter
To replace:
DANGER
DANGER:
Before opening the service hatch,
always make sure that the unit’s supply voltage
is switched off.
NOTE:
For LTR-series units: The power cuts off
when the service hatch is opened.
1. Open the service hatch.
2. Release the filter locking levers, if there are any.
3. Pull the old filter out of the unit.
4. Insert a new filter.
5. Close the filter locking levers, if there are any.
6. Close the service hatch properly.
7. Switch the power on.
TIP:
Remove the metal frame from the used bag
filter and recycle it along with metal waste. The
filter fabric can be disposed of along with mixed
waste.
Plain filter
To replace:
DANGER
DANGER:
Before opening the service hatch,
always make sure that the unit’s supply voltage
is switched off.
NOTE:
For LTR-series units: The power cuts off
when the service hatch is opened.
1. Open the service hatch.
2. Remove the filter from the ventilation device.
3. Remove the filter fabric from the frame.
4. Replace the filter fabric with a new one.
5. Insert the filter back into the unit so that the
support grid faces the heat recovery wheel.
6. Close the service hatch properly.
7. Switch the power on.
TIP:
Replace only the fabric part of the plain
filter. Reuse the metal frame with a clean filter.
The filter fabric can be disposed of along with
mixed waste.
Pleated filter
To replace:
DANGER
DANGER:
Before opening the service hatch,
always make sure that the unit’s supply voltage
is switched off.
NOTE:
For LTR-series units: The power cuts off
when the service hatch is opened.
1. Open the service hatch.
2. Remove the filter from the ventilation device.
3. Insert the new filter.
• Pay attention to the arrow on the filter
showing the airflow through the filter.
4. Close the service hatch properly.
5. Switch the power on.
TIP:
The filter can be disposed of along with
mixed waste.