Enertech Bentone BG400, Инструкция по установке и обслуживанию

Страница: 8 / 36

Removal of fan house unit from
burner.
Loosen the screws. Swing out the fan
house. Remove the ionisation and
ignition cables from the electrodes.
Remove the bolt on the lange.
Remove the combustion unit from the
burner. Fit the enclosed lange and
gasket to the boiler. If new ixing holes
must be drilled, use the ixing lange
as a pattern.
Removal of valve unit from burner
Remove the plug-in contact from the
multi-bloc. Loosen the union nut.
MOUNTING ON THE BOILER
Installation example
Connect the gas to the burner by
means of the ball valve. Ensure that
the union nut, ball valve and tubing
make it easy to remove the burner for
inspection and service.
172 205 36 08-01