Enertech Bentone BG400, Инструкция по установке и обслуживанию

Страница: 21 / 36

172 305 31 08-01
GENERAL INSTRUCTIONS, 1-STAGE BURNER
Adjustment of inner assembly
Control of burner head
Air adjustment
Loosen the stop screw and turn the
knob along the scale to the desired
position and tighten the screw. Check
the air adjustment by making a lue
gas analysis.
Adjustment of brake plate
- Loosen the screw on the adjust-
ment device.
- To reduce the opening: turn the
knob to the left.
- To increase the opening: turn the
knob to the right.
The adjustment of the position of the
brake plate affects the air low. It is
therefore always necessary to make a
ine adjustment of the air by means of
the adjustment device of the burner.
Control of burner head
To check the burner head, brake plate
and electrodes proceed as follows:
Loosen the nuts a. Swing out the
burner. Remove the screw b and
the knob for adjustment of burner
head. Loosen the screw c so much
so that the inner assembly can be
pulled out.
Air adjustment