EnerSys Alpha FXM HP 1100 Скачать руководство пользователя страница 131

Страница: 131 / 150

0170022-J0 Rev A

Page 119

as a downloadable file. This file contains most of the information that is viewable from the LCD and WEB

UI and serves as a snapshot of the present state of the controller.
To download this file:

1. If using a controller with the LCD or OLED display, insert a USB drive.
2. Go to the menu location to find the download button:

a. On the LCD, go to

Maintenance

and scroll down to the

Export Inventory to CSV

button and

press it.

b. On the WEB, go to

Controller > Inventory

and press the

Export Inventory to CSV

button

in the

Inventory

table.

c. On the in-shelf controller with the OLED display, press the

Menu

button and scroll down to

ExpInv

and press the

Menu

button again.

3. Press the

Export

button to initiate the download.

Once started, the file is downloaded to the USB drive or PC depending on where the export was initiated

from. If initiated from the LCD or OLED display it is downloaded to the USB drive. If initiated from the

WEB it is downloaded to the PC. Depending on the amount of data to download, it may take several

minutes to complete.
This file can now be opened in a spreadsheet program for analysis.

NOTE

Sensitive data related to users and user permissions, passwords, and licensing is not included in

the exported file.

10.6

User Account Maintenance

10.6.1

Setting Up Users and Permissions

NOTE

These features are only available to those with Administrator or Account Manager privileges.

By default the CXC HP has seven user accounts: one administrator, one account manager and five

operators. The Name field in these accounts is not editable. User accounts cannot be added or deleted,

but they can be enabled or disabled.
Within the

Users and Security

menu you can use the

User Roles

drop-down menu to configure what

privileges each user has when accessing the system or changing passwords.
This section of the manual covers the following:

•

Editing user permissions

•

Enabling new users

•

Disabling users

10.6.2

Editing User Permissions

These features are only available to those with Administrator or Account Manager privileges.

Содержание Alpha FXM HP 1100























































































































































Результаты поиска

Содержание Alpha FXM HP 1100

Отзывы:

Похожие инструкции для Alpha FXM HP 1100

Бренды по названию

Популярные бренды

EnerSys Alpha FXM HP 1100, Техническое руководство

Результаты поиска

Содержание Alpha FXM HP 1100

Отзывы:

Похожие инструкции для Alpha FXM HP 1100

Бренды по названию

Популярные бренды