2
© 2019 Enerpac, All Rights Reserved.
EU Declaration of Conformity
Enerpac declares that this product has been
tested and conforms to applicable standards
and is compatible to all CE Requirements.
A copy of an EU Declaration of Conformity is
enclosed with each shipment of this product.
2.0 SAFETY
Read all introductions carefully. Follow all
recommended safety precautions to avoid
personal injury as well as damage to the
product and / or damage to other property.
Enerpac cannot be responsible for any damage
or injury from unsafe use, lack of maintenance,
or incorrect operation. Do not remove warning
labels, tags, or decals. In the event of any
questions or concerns arising, contact Enerpac
or a local Enerpac distributor for clarification.
If you have never been trained on high-pressure
hydraulic safety, consult your distributor or
service centre for information about Enerpac
Hydraulic Safety Courses.
This manual follows a system of safety alert
symbols, signals, words, and safety messages
to warn the user of specific hazards. Failure to
comply with these warnings could result in
death or serious personal injury, as well as
danage to the equipment or other property.
The Safety Alert Symbol
appears throughout this
manual. It is used to alert
you to potential physical
injury hazards. Pay close
attention to Safety
Alert Symbols and obey all safety
messages
that follow this symbol to avoid
the possibility of death or serious injury.
HM01 •HM02 •HM03 •HM04 •HM05 •HM06
•HM07 •HM08 •HM09 •HM10 •HM11 •HM12
•HM13 •HM14 •HM15
These tools conform with the
requirements for CE.
Safety Alert Symbols are used in conjunction
with certain Signal Words that call attention
to safety messages or property damage
messages and designate a degree or level of
hazard seriousness. The Signal Words used
in this manual are WARNING, CAUTION, and
NOTICE.
Indicates a hazardous
situation that, if not avoided,
will
result in death or serious personal injury.
Indicates a hazardous situation
that, if not avoided,
could
result in death or
serious personal injury.
Indicates a hazardous situation
that, if not avoided,
could
result in minor or
moderate personal injury.
Indicates information considered
important, but not hazard related (e.g.
messages relation to property damage). Please
note that the Safety Alert Symbol will
not
be
used with the signal word.
2.1 Safety Precautions - HydraMax®
Tensioners
Failure to observe and comply with the
following precautions could result in death
or serious personal injury. Property damage
could also occur.
• Read and completely understand the
safety precautions and instructions in this
manual before operating the tensioners
or preparing them for use. Always follow
all safety precautions and instructions,
including those that are contained within
the procedures of this manual.
• When the system is under pressure DO
NOT STAND IN LINE with the direction of
force of the tensioners. Keep this area clear
of personnel at all times when the system
is under pressure. If the bolt should fail,
serious personal injury or death could result
if loose or broken parts become projectiles.
DANGER
WARNING
CAUTION
NOTICE
WARNING
