15
If connected equipment is in the ON position
4. Turn on equipment.
If the generator is overloaded or if there is a malfunction in your equipment, green output indicator light will turn off and
indicator light will turn on and power output from the generator w
the ignition switch to stop engine in order to reset the power circuit of the generator.
If the equipment power requirement meets the system capability for initial start
turn on at the same time for a short period, that's normal. The
equipments start.
How to Use 12 Volt DC Output
When using the DC output, turn the Auto Idle
You can use DC power and AC power at the same time.
DC overload circuit may disconnect, reset circuit protector by pressing reset button.
Special Instructions for Charging 12Volt Batteries
When charging, put the charging plug in the DC socket, and then connect to the terminals of the battery. After charging remov
battery terminals first then un-plug charging plug.
If connected equipment is in the ON position before connecting, it will start suddenly, and cause injury
If the generator is overloaded or if there is a malfunction in your equipment, green output indicator light will turn off and
power output from the generator will not continue. If this occurs the engine will not stop, you must turn off
in order to reset the power circuit of the generator.
the equipment power requirement meets the system capability for initial start-up, the overload indicator and output indicator will
hort period, that's normal. The red indicator light will turn off and the green light stays
DC output, turn the Auto Idle switch to the OFF position (see diagram #56361 for switch location)
You can use DC power and AC power at the same time.
DC overload circuit may disconnect, reset circuit protector by pressing reset button.
Special Instructions for Charging 12Volt Batteries (diagram #56013)
When charging, put the charging plug in the DC socket, and then connect to the terminals of the battery. After charging remov
plug. This procedure will reduce the chances of sparking.
use injury or damage.
If the generator is overloaded or if there is a malfunction in your equipment, green output indicator light will turn off and the red overload
this occurs the engine will not stop, you must turn off
overload indicator and output indicator will
light will turn off and the green light stays on after the
switch to the OFF position (see diagram #56361 for switch location)
When charging, put the charging plug in the DC socket, and then connect to the terminals of the battery. After charging remove
