12
3. For electric/recoil start models, put the key into
4. Turn the electric start key to “START” position and release when engine starts
5. Let the engine run for at least 5 seconds t
Recoil Pull Starting
(only for electric/recoil
1. Open gasoline switch
2. Place the key into the ignition switch, and turn the key to ‘ON’ position.
rocker style ignition in the on position.
3. Pull the starting rope until feel the resistance, then pull briskly to start the engine.
Do not allow the starter grip to snap back against the engine. Return it gently to prevent damage to the starter
Diagram #56009
NOTE: If the engine will not start, chec
necessary and then re
ut the key into the ignition switch, and turn the key to
Turn the electric start key to “START” position and release when engine starts
5. Let the engine run for at least 5 seconds then move the choke switch to the run position
only for electric/recoil and recoil start only models)
switch, and turn the key to ‘ON’ position. For pull start only models place
ocker style ignition in the on position.
Pull the starting rope until feel the resistance, then pull briskly to start the engine.
Do not allow the starter grip to snap back against the engine. Return it gently to prevent damage to the starter
NOTE: If the engine will not start, check the oil level, fill the engine with oil if
necessary and then re-try starting the unit.
switch, and turn the key to ‘ON’ position.
position
For pull start only models place
Pull the starting rope until feel the resistance, then pull briskly to start the engine.
Do not allow the starter grip to snap back against the engine. Return it gently to prevent damage to the starter or housing.
k the oil level, fill the engine with oil if
