11
6. Staring the Engine
Electric start
（
only for electric start model
1. Open gasoline switch and air inflow knob.
2.. When 1
st
starting the unit or after the unit has been allowed to run out of fuel or stored for an extended period of time it
will be necessary to prime the fuel system by depressing the “Primer Bulb” multiple times to ensure the fuel system is filled
and there is no air in this system. You may have to depress the primer bulb from 20 to 50 times or until it becomes hard
press before attempting to start. It is also sometimes necessary to depress the primer bulb prior to each start and
normal. To start a cold engine, move the choke lever
halfway between the start and run positions.
NOTE: Some models may be equipped with a knob style push/pull choke. On these units pull the choke knob for the starting
position and push the knob in for the running position.
Make sure that all appliances are disc
start models
）
and air inflow knob.
starting the unit or after the unit has been allowed to run out of fuel or stored for an extended period of time it
ary to prime the fuel system by depressing the “Primer Bulb” multiple times to ensure the fuel system is filled
and there is no air in this system. You may have to depress the primer bulb from 20 to 50 times or until it becomes hard
sometimes necessary to depress the primer bulb prior to each start and
move the choke lever to the start position. To restart a warm
. To restart a hot engine place the choke in the run position.
NOTE: Some models may be equipped with a knob style push/pull choke. On these units pull the choke knob for the starting
position and push the knob in for the running position.
Make sure that all appliances are disconnected from the AC Receptacle.
Choke Lever Indicator
starting the unit or after the unit has been allowed to run out of fuel or stored for an extended period of time it
ary to prime the fuel system by depressing the “Primer Bulb” multiple times to ensure the fuel system is filled
and there is no air in this system. You may have to depress the primer bulb from 20 to 50 times or until it becomes hard to
sometimes necessary to depress the primer bulb prior to each start and which is
engine set the choke lever
To restart a hot engine place the choke in the run position.
NOTE: Some models may be equipped with a knob style push/pull choke. On these units pull the choke knob for the starting
onnected from the AC Receptacle.
Choke Lever Indicator
