HEMACOOL
TM
Model HMC-MIL-1 Operations Manual August 2003
Energy Storage Technologies, Inc.
Dayton, Ohio 45459
B.
UNPACKING AND READYING THE HemaCool™ FOR OPERATION:
Remove the
HemaCool™
from its crating materials. Unlatch the outer lid. This lid has
10 latches, one on each end and four on each side. Flip out and rotate the key tabs on
each latch until each latch claw has released its hasp.
Fig. 2.
To unlatch the outer lid: flip up latch tab and rotate ½ turn left. Drop open.
Fig. 3.
Under the exterior lid the
HemaCool™
is divided into three compartments.
The
HemaCool™
is shipped with its internal batteries disconnected. Before initial use
the batteries must be connected. To do this:
1.
Open the compartment lid labeled “Cable And Manual Storage” (upper half of
Fig. 4
).
