Energy Storage Technologies HemaCool HMC-MIL-1 Скачать руководство пользователя

Страница: 3 / 34

HEMACOOL

Model HMC-MIL-1 Operations Manual August 2003

Energy Storage Technologies, Inc.

Dayton, Ohio 45459

CAUTIONS:

•

USE THE COOL (+4.0±1.5°C [39.2° ±2.7°F]) TEMPERATURE SETTING
ONLY WITH MATERIALS THAT MUST BE STORED ABOVE
FREEZING.

USE THE FREEZE (–22+0/–6°C [–7.6+0/–11°F]) TEMPERATURE
SETTING ONLY FOR MATERIALS THAT MUST BE STORED
FROZEN.

•

THE TEMPERATURE SETTING TOGGLE SWITCH IS A LOCKING
TYPE SWITCH, AND YOU MUST PULL OUT ON THE HANDLE TO
CHANGE IT. DO NOT FORCE!

•

IF UNIT IS STORED INVERTED OR ON ITS SIDE, ALLOW IT TO SIT
UPRIGHT AT LEAST TWO HOURS BEFORE OPERATING IT.

•

DO NOT TILT THE UNIT OVER 30° WHILE OPERATING.

•

FOR MAXIMUM EFFICIENCY DO NOT TILT AT ALL DURING
OPERATION.

•

DO NOT STORE THE UNIT IN AMBIENT TEMPERATURES BELOW
-30°C (-22°F) OR OVER 65°C (149°F).

•

DO NOT OPERATE THE UNIT IN THE REFRIGERATOR MODE IN
AMBIENT TEMPERATURES BELOW -20°C (-4°F) OR ABOVE 49°C
(120°F).

•

DO NOT SIT OR STAND ON THE UNIT.

•

DO NOT TRANSPORT UNIT WITHOUT THE OUTER LID IN PLACE
AND ALL INNER LID AND OUTER LID LATCHES CLOSED.

•

HEMACOOL UNITS MAY BE SAFELY STACKED TWO UNITS HIGH.

•

DO NOT SUBMERGE THE UNIT IN WATER.

Содержание HemaCool HMC-MIL-1



































Результаты поиска

Содержание HemaCool HMC-MIL-1

Отзывы:

Похожие инструкции для HemaCool HMC-MIL-1

Бренды по названию

Популярные бренды

Energy Storage Technologies HemaCool HMC-MIL-1, Руководство по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание HemaCool HMC-MIL-1

Отзывы:

Похожие инструкции для HemaCool HMC-MIL-1

Бренды по названию

Популярные бренды