Energy Storage Technologies HemaCool HMC-MIL-1 Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 34

Energy Storage Technologies HemaCool HMC-MIL-1 Скачать руководство пользователя страница 6

HEMACOOL

TM

Model HMC-MIL-1 Operations Manual August 2003

Energy Storage Technologies, Inc.

Dayton, Ohio 45459

5

The HemaCool™ will perform in either COOL or FREEZE mode.

•

In COOL mode (+4.0°) the unit -- provided its two internal 20 amp-hour batteries

are properly charged -- will maintain a temperature range of 1°C to 6°C (34°F to

43°F) for more than 24 hours, at +24°C ambient temperature (75°F).

•

In FREEZE mode (-22° ) the unit – provided its two internal 20 amp-hour

batteries are properly charged – will keep blood products frozen for more than

eight hours, at an ambient temperature of +24°C (75°F). (This colder operation

does, however, reduce the battery-powered hold time. See specifications at the

end of this document.)

For additional payload security, the

HemaCool™

is also equipped with an internal

heater that will prevent refrigerated payload from freezing if the unit is in an

environment that is below 1°C (34°F), but no lower than –20°C (-4°F).

NOTE:

The standard default temperature scale setting for the

HemaCool™

is

Celsius (°C). The unit may be special ordered to display temperature in the

Fahrenheit (°F) scale.

«
...
4
5
6
7
8
...
»

Содержание HemaCool HMC-MIL-1



































Отзывы:

Нет отзывов