Energy micro EFM32-G8XX-DK, Руководство пользователя

Страница: 20 / 70

Preliminary
...the world's most energy friendly microcontrollers
2010-04-09 - t0005_1.10 20
www.energymicro.com
Bit Name Reset Access Description
15:2 Reserved
To ensure compatibility with future devices, always write bits to 0.
1:0 BUS_CFG 0x0 RW BUS configuration register
Set this register to configure which bus has access to the SRAM, Nor Flash and TFT display.
Value Mode Description
0 FSMC The FSMC has access
1 EBI The EBI interface has access
2 SPI The SPI interface has access
10.2.12 BC_PERCTRL - Peripheral control register
Offset Bit Position
0x018
15 14 13 12 11 10
9 8 7 6 5 4 3 2 1 0
Reset
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Access
RW RW RW RW RW RW RW RW RW RW RW RW RW RW RW RW
Name
IRDA_SHUTDOWN
RS232_SHUTDOWN ACCEL_SELFTEST
ACCEL_GSEL
AUDIO_IN
AUDIO_OUT
ANALOG_DIFF
ANALOG_SE
IRDA
I2C SPI
RS232B RS232A
POTMETER
AMBIENT
ACCEL
Bit Name Reset Access Description
15 IRDA_SHUTDOWN 0 RW Shut down IrDA transceiver
Set this bit to shut down the IrDA transceiver
14 RS232_SHUTDOWN 0 RW Shut down RS232 driver
Set this bit to shut down the RS232 driver. It is strongly recommended that this is done when the application does not use RS232.
13 ACCEL_SELFTEST 0 RW Accelerometer selftest mode
Set this bit to put the accelerometer into selftest mode
12 ACCEL_GSEL 0 RW Accelerometer g-select
Use this bit to configure the g-range of the accelerometer
Value Mode Description
0 LOW The g-range is up to 1.5g
1 HIGH The g-range is up to 6g
11 AUDIO_IN 0 RW Audio in connect
Set this bit to connect the audio in amplifier to the EFM
10 AUDIO_OUT 0 RW Audio out connect
Set this bit to connect the audio out amplifier to the EFM
9 ANALOG_DIFF 0 RW Analog differential input connect
Set this bit to connect the analog differential inputs to the EFM
8 ANALOG_SE 0 RW Analog single ended input connect
Set this bit to connect the analog single ended inputs to the EFM
7 IRDA 0 RW IrDA connect
Set this bit to connect the IrDA transceiver to the EFM
6 I2C 0 RW I
2
C bus connect
Set this bit to connect the I
2
C devices to the EFM
5 SPI 0 RW SPI bus connect
Downloaded from Elcodis.com electronic components distributor