ENERGY KING 35EKB, Инструкция по установке, эксплуатации и обслуживанию

Страница: 27 / 76

Rev 07/13/09 ENERGY KING™ Wood/Coal Boiler Owner’s Manual
Š
U. S. 21
Installation
Zones
A “heat dump” zone is required for all
installations. The purpose of this zone is to
circulate heated water away from the boiler
when no other zones are calling for heat. In
this way it will prevent your ENERGY KING
Wood/Coal Boiler from overheating. However,
as a safety feature, if your Boiler should
overheat or build up excess pressure, it will
trigger the pressure relief valve which will
release water, thus relieving pressure.
RJM Manufacturing, Inc. recommends installing
a normally open zone valve and a strap-on
(non-immersion, surface mounted) aquastat
(not included) as part of every dump zone valve
installation. Consult your local ENERGY KING
dealer or plumber for possible sources of
appropriate valves and strap-on aquastats
acceptable for use with your ENERGY KING
Wood/Coal Boiler.
In-floor Heating
To use the ENERGY KING Wood/Coal Boiler
with in-floor heating, a mixing valve may be
required to lower the water temperature before
it is delivered to your in-floor heating system.