Energolux SAD48HD1-A, Руководство по обслуживанию

Страница: 24 / 87

Light commercial(High ESP Duct 196Pa) Service Manual
23
NOTES:The remote control signal effectively work for straight line from 8 meters, when the battery
after the power consumption, effective work will shorten the distance
◇
Mounting hole set up: please use certain instrument to dig a square hole with 88x88mm on the ceiling
◇ Remote controller receiver installation.
Hold the two sides (with clip sides) of the receiver, set the spring clip in the vertical way then put itinto
the mounting hole, if the two sides of the receiver is in the same level with the ceiling the installation is
finished.
◇
Signal line connection: connect the wire of remote controller receiver to the CN-DISP terminal board
on PCB of indoor unit wire box then fix it.
3. Outdoor unit installation
3.1 Select installation position of outdoor unit
3.1.1 Installation site and base
◇
The site shall be strong enough to bear its weight, prevent noise and vibration.
◇ The site shall be ensured to avoid direct sunshine, if necessary set a Havelock above the outdoor unit.
◇
The site shall be easy to drainage the rain water and the frost water.
◇ The site shall be ensured that the outdoor unit will not be covered by snow during the winter season.
◇
The site shall be ensured that the outlet is not facing the strong wind.
◇
The sit e shall be ensured that outlet air and operation noise will not affect the neighbors’ daily life.
◇ The site shall be ensured that the outdoor unit will not be affected by the garbage and oil mist.
Warning
：
If outdoor unit working under such environment which contains oil (including machine oil)
salt(marine areas), sulfide gas (hot springs and oil refinery areas), those substance may lead to
the failure work of the outdoor unit.
3.1.2 Maintenance and ventilation space
◇
The site shall be easy for ventilation then the outdoor unit can inhale and discharge air easily. What’s
more please reserve enough space for maintenance.