18
j.
Basics cutting guide
Follow the steps below to prevent damage to tree or shrub bark. Do not use a back-and-
forth sawing motion.
Make a shallow first cut (1/4 of limb diameter) in the underside of the limb close to the main
limb or trunk, Fig 14 (A).
Make a second cut, Fig 14 (B), from the top side of the limb outwards from the first cut.
Continue to cut through the limb until the limb separates from the tree. Be prepared to
balance the weight of the tool when the limb fails.
Make a final cut close to trunk, Fig 14 (C).
NOTE: For second and final cuts (from top of limb of branch), hold font cutting guide against
the limb being cut. This will help steady the limb and make it easier to cut. Allow chain to
cut for you. Exert only low downward pressure. If you force the cut, damage to the bar,
chain or motor can result.
Release the trigger as soon as the cut completed.
Failure to follow proper cutting procedures will result in the bar and chain binding and
becoming pinched or trapped in the limb. If this should happen:
-
Stop the motor and remove the battery pack.
-
If the limb can be reached from the ground, lift the limb while holding the saw. This should
release the “pinch” and free the saw.
If the saw is still trapped, call a professional for assistance.
Содержание EZ20VELPC-UK
Страница 1: ......
Страница 3: ...Let s get started You re excited to power up so we ll keep this brief...
Страница 12: ...12 3 USE...
Страница 13: ...13...