Energizer EZ20VELPC-UK, Руководство пользователя

Страница: 17 / 27

17
NOTE: It is normal for oil to seep from the saw when not in use. To prevent seepage, empty
the oil tank after each use then run for one minute.
When storing the unit for a long period of time (three months or longer) be sure the chain
is lightly lubricated. This will prevent rust on the chain and bar sprocket.
f.
Operation
Danger! Never cut rear power lines, electric cords or other electric sources. If bar and chain
jams on any electrical cord or line, do not touch the bar or chain; they can become
electrically live and very dangerous.
Continue to hold the pole saw by the insulated rear handle or lay it down and away from
you in a safe manner. Disconnect the electrical service to the damaged line or cord before
attempting to free the bar and chain from the line or cord. Contact with the live electric cords
or lines will result in death by electrocution or serious injury.
Warning! Do not allow familiarity with this product to make you careless. Remember that
a careless fraction of a second is sufficient to inflict serious injury.
Do not use any attachments or accessories not recommended by the manufacture of this
product. The use of attachments or accessories not recommended can result in serious
personal injury.
g.
Applications
You may use this product for the purposes listed below:
-
Limbing
-
Pruning
h.
Starting and stopping
Hold the pole saw as shown in Fig 11 and ensure that you are well away from anything that
may contact the blade.
Press and hold the ON/OFF trigger lock out button, Fig 12.
Depress the ON/OFF trigger, Fig 13.
To stop the motor, release the trigger to stop the pole saw. Upon release the trigger, the
ON/OFF trigger lock-out button will automatically reset to the locked position.
i.
Preparation for cutting
Wear non-slip gloves for maximum grip and protection. Maintain a proper grip on the unit
whenever the motor is running. Use your right hand to firmly grip the rear handle while your
left hand has firm a grip on the pole shaft.
Hold unit firmly with both hands. Always keep your left hand on the pole shaft and your right
hand on the rear handle, so your body is to the left of the chain line. Never use a left handed
(cross handed) grip, or any stance that places your body or arm across the chain line.
Never stand directly under the limb you are cutting.