Energie MONOBLOC 100esm, Техническое руководство

Страница: 38 / 92

38
MONOBLOC 100L
English
2.4. Technical Data
Unit. 100l
Equipment type Heat Pump Air/Water for DWH
Tank Rated Capacity L 100
Weight Empty Kg. 70
Cylinder Material - Enamelled Steel
Outer Plate - Sheet Metal
Insulation - High Density
Polyurethane
50mm
Corrosion Protection - Yes (Magnesium Anode)
Maximum Water Temperature
0
C 80
Maximum Operating Pressure bar 7
Test Pressure bar 10
Heat Loss kWh/24h 0,95
Protection - IPX1
Electric Supply - 220-240 V / single phase / 50 Hz
Electrical Power HP (med / max) W 400/650
Electrical Element W 1000
Thermal power HP W 1800
Fan Power W 65
Maximum Operating A 3,2 + 4,4 (with electrical element)
Max Temperature DWH (HP) 0 C 55
Max Temperature DWH (Backup) 0 C 70
Fluid -/kg R 134a / 1,1
Tapping Profile - M
COP 1 - 2,8
Heating Time 1) (HH:mm) 02:20
Max. Water in Single Intake 40 °C 1) L 109
Energy Class - ErP 1) - A+
Energy Efficiency 1) % 117
Annual Energy Consumption 1) kWh/year 437
Outside Air Temperature (Min/Max) 0 C -5/40
Indoor Sound Level dB(A) 51
Air Flow Rate m
3
/h 450
Maximum Duct Length m 8
1) A20/W10-54, according EN16147 and delegated regulations (EU) Nº812/2013
3. TRANSPORT
Transporting the equipment must be carried out with an inclination below 45
0
;
The equipment must be raised and lowered with extreme care to avoid impact that
could damage the material;
Make sure the belts and/or transportation straps do not damage the material;
Always use means of transportation suitable for the equipment (pallet lift, forklift,
etc…);
WARNING
Technical Manual