Introduction
Safety regulations
The operator of the photovoltaic module is responsible for
compliance with all relevant legal regulations and guidelines.
Please commission, operate or maintain the photovoltaic
modules only in accordance with the following regulations
and standards:
»
Installation instructions;
»
Applicable documents (country-specific regulations on
pressure equipment, operational safety, hazardous goods
and environmental protection);
»
Plant-specific regulations and requirements;
»
Applicable country-specific laws, regulations and rules for
planning, installing and operating solar power systems
and for working on the roof;
»
Valid international, national and regional regulations, in
particular for the installation of electrical devices and
systems, for working with direct current and regulations
of the responsible electricity provider for the parallel
operation of solar power systems;
»
Accident prevention regulations and
»
other applicable standards and generally recognized
codes of practice.
Staff qualifications
Operators or installers are responsible for ensuring that
installation, maintenance, commissioning and dismantling
are only carried out by trained specialists with recognized
training certificates (from the respective state or federal
organizations) for the respective specialist area.
All electrical work may only be carried out by an officially
certified specialist in accordance with the applicable
standards, VDE regulations, accident prevention regulations
and the regulations of the local electricity company.
Validity
These instructions only apply to PV modules from Energetica
Industries GmbH. Energetica Industries GmbH assumes no
liability for damage resulting from failure to observe these
instructions.
It is the responsibility of the system installer to observe the
wiring and dimensioning of the system as well as all necessary
safety regulations for their design and installation.
These instructions do not imply any liability on the part
of Energetica Industries. Energetica is only liable within
the framework of contractual agreements or within the
framework of assumed guarantees. In addition, Energetica
Industries assumes no responsibility for the functionality and
safety of the PV modules.
Please also observe the instructions for other system
components that are to be part of the photovoltaic system
very carefully. If necessary, statics must be created for the
entire project.
In case we do not adequately answer your questions in these
instructions, please contact your system supplier first. It is
the responsibility of the system supplier to ensure that all
components of the system are technically coordinated and
comply with each other.
Information for the operator
Keep these instructions for the entire service life of the
photovoltaic system. For information on the formal
requirements for PV systems, contact your system supplier.
For information on the formal requirements for PV systems,
contact your system supplier.
Before installing the PV system, find out about the guidelines
and approval requirements from the responsible local
authorities and energy suppliers.
Only if you take these requirements into account can you
ensure the economic success of your investment.
Applicable Documents
These installation instructions are only valid in conjunction
with the following technical information.
»
Product data sheet for the e.Classic M HC or
e.Classic M HC black.
»
Information sheet: Packaging and transport of Energetica
modules.
Page 2
e
