3.6V Li-Ion SCREWDRIVER ENS460DRS
NOISE INFORMATION
Wear hearing protection!
Measured sound values determined according to EN 60745.
The noise figures quoted are emission levels and are not necessarily safe working levels. Whilst there is a
correlation between the emission and exposure levels, this cannot be used reliably to determine whether or
not further precautions are required. Factors that influence the actual level of exposure of work-force include
the characteristics of the work room, the other sources of noise, etc. i.e. the number of machines and other
adjacent processes, and the length of time for which an operator is exposed to the noise. Also the permissible
exposure level can vary from country. This information, however, will enable the user of the machine to make a
better evaluation of the hazard and risk.
VIBRATION
The European Physical Agents (Vibration) Directive has been brought in to help reduce hand arm vibration
syndrome injuries to power tool users. The directive requires power tool manufacturers and suppliers to
provide indicative vibration test results to enable users to make informed decisions as to the period of time a
power tool can be used safely on a daily basis and the choice of tool.
Further advice can be found at www.hse.gov.uk
Vibration total values (triax vector sum) determined according to EN 60745:
Vibration emission value a
h
= 0.494 m/s²
Screwdrivers without impact
Uncertainty K = 1.5 m/s
2
The declared vibration emission value should be used as a minimum level and should be used with the current
guidance on vibration.
The declared vibration emission been measured in accordance with a standardised test stated above and may
be used to compare one tool with another tool.The declared vibration emission value may also be used in a
preliminary assessment of exposure.
WARNING!
The vibration emission value during actual use of the power tool can differ from the declared value depending
on the ways in which the tool is used dependent on the following examples and other variations on how the
tool is used:
How the tool is being used and the materials being cut or drilled.
The tool being in good condition and well maintained
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles.
And the tool is being used as intended by its design and these instructions.
While working with this power tool, hand/arm vibrations occur. Adopt the correct working practices in order to
reduce the exposure to vibration.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed.
WARNING!
Identify safety measures to protect the operator that are based on an estimation of exposure in the actual
conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched
off and when it is running idle in addition to the trigger time).