3.6V Li-Ion SCREWDRIVER ENS460DRS
4 Use and maintenance of the tool
a)
Do not force the tool. Use the correct tool for your application.
The correct tool will do the work better
and safer in the conditions for which it was manufactured.
b)
Do not use the tool if the switch does not make it possible to change from the operating condition to
stop and vice versa.
Any tool which cannot be controlled by the switch is dangerous and should be repaired.
c)
Disconnect the power cord before any adjustment, changing an accessory or before storing the
tool.
Such preventive safety measures reduce the risk of starting the tool accidentally.
d)
Keep idle tools out of the reach of children and do not allow persons unfamiliar with the tool or
these instructions to operate it.
Tools are dangerous in the hands of untrained users.
e)
Maintain the tool. Check that there is no misalignment or obstruction of the moving parts, broken
parts or any other condition that could affect the operation of the tool. In the event of damage, have
the tool repaired before using it.
Many accidents are due to badly maintained tools.
f)
Keep cutting tools sharp and clean.
Properly maintained tools with sharp cutting edges are less likely to
bind and are easier to control.
g)
Use the tool, accessories and blades etc., in accordance with these instructions, while taking into
account the work conditions and the work to be done.
The use of the tool for operations other than those
intended could result in dangerous situations.
5)
Battery tool use and care
a) Recharge only with the charger specified by the manufacturer.
A charger that is suitable for one type of
battery pack may create a risk of fire when used with another battery pack.
b) Use power tools only with specifically designated battery packs.
Use of any other battery packs may
create a risk of injury and fire.
c)When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can make a connection from one terminal to another.
Shorting the battery terminals together may cause burns or a fire.
d) Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help.
Liquid
ejected from the battery may cause irritation or burns.
6)
Service
a)
Have your power tool serviced by a qualified repair person using only identical replacement parts.
This will ensure that the safety of the power tool is maintained.