22
In more detail...
ENB539TAS by Energer
Trouble shooting
Recycling and disposal
Waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist. Check
with your Local Authority or local store for recycling advice.
Suspected malfunctions are often due to causes that the user can fix
themselves. Therefore check the product using this section. In most cases the
problem can be solved quickly.
WARNING! Only perform the steps described within
these instructions! All further inspection, maintenance
and repair work must be performed by an authorised
service centre or a similarly qualified specialist if you
cannot solve the problem yourself!
Problem
Possible cause
Solution
1. Product does
not start
1.1 Not connected to
power supply
1.2 Power cord or plug
is defective
1.3 Other electrical
defect to the product
1.1. Connect to power
supply
1.2. Check by a specialist
electrician.
1.3. Check by a specialist
electrician
2. Product does not
reach full power
2.1 Extension cord not
suitable for operation
with this product
2.2 Power source (e.g.
generator) has too low
voltage
2.3 Air vents are
blocked
2.1. Use a proper
extension cord
2.2. Connect to another
power source
2.3. Clean the air vents
3. Unsatisfactory
result
3.1 Accessory not
suitable for work piece
material
3.1. Use proper accessory
Trouble shooting
3.2 riving knife not aline
with blade.
3.2 Check by a speciallist
electrician.
GB
IE
