21
Care and maintenance
In more detail...
ENB539TAS by Energer
Power cord
If the power cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a safety hazard.
Repair
1. This product does not contain any parts that can be repaired by the
consumer. Contact a qualified specialist to have it checked and repaired.
Storage
1. Clean the product as described above.
2. Store the product and its accessories in a dry, frost-free place.
3. Always store the product in a place that is inaccessible to children. The
ideal storage temperature is between 10 and 30°C.
4. We recommend using the original package for storage or covering the
product with a suitable cloth to protect it against dust.
Transportation
1. Switch the product off and disconnect it from power supply before
transporting it anywhere.
2. Attach transportation guards, if applicable.
3. Always carry the product by its handle.
4. Protect the product from any heavy impact or strong vibrations which may
occur during transportation in vehicles.
5. Secure the product to prevent it from slipping or falling over.
UK plug
If you need to replace the fitted plug then follow the instructions below.
IMPORTANT: The wires in the mains lead are coloured in accordance
with the following code:
Blue – Neutral
Brown – Live
Green & Yellow – Earth
As the colours of the wires in the mains
lead of this apparatus may not
correspond with the coloured markings
identifying the terminals in your plug,
proceed as follows. The wire which is
coloured blue,must be connected to
the terminal, which is marked with N or coloured black. The brown wire must
be connected to the terminal which is marked with an L or coloured red. The
green & yellow wire must be connected to the terminal which is marked Earth E.
WARNING: Never connect live or neutral wires to the earth terminal of the plug.
Only fit an approved 13 Amp BS1363/A plug and the correct rated fuse.
NOTE: If a moulded plug is fitted and has to be removed take great care in
disposing of the plug and severed cable, it must be destroyed to prevent
engaging into a socket.
GB
IE
