www.enerdrive.com.au
Page 19
6. FUNCTION SETUP MENU
In the Function setup menu, your ePRO Plus can be adjusted further to t your needs. This menu
can only be entered after you have nished the initial Setup wizard. The following sequence
gives access to the Function menu:
When the Function setup menu is entered, you can use the left and right arrow keys to browse
through the di erent Functions. By pressing the MENU key, the selected Function value can
be viewed. The left and right arrow keys can now be used to change this value. Pressing the
MENU key again, will then step back to the Function menu. From any menu position, the
normal operating mode can be accessed again by pressing the MENU key for 3 seconds. This
will also save any Function value changes to internal memory. When no keys are pressed for 120
seconds while operating in the Function setup menu, the ePRO Plus will automatically return
to the normal operating mode again without saving any Function value changes. All available
Functions are described in the next chapters.
When the message ‘Locked’ appears on the display while trying to edit one of the
Functions, the ePRO Plus should be unlocked rst. See chapter 8 for more information.
6.1 Battery Bank 1 (Main) Properties
F1.0
Battery type. Choose the chemistry type of your battery. Table 7 shows the available
types.
Default: AGM
Range: see table 7
Table 7
Battery type Description
AGM
Typical deep cycle sealed lead acid battery with Absorbed Glass Matt
construction.
GEL
Typical deep cycle sealed lead acid battery with ‘gelled’ electrolyte.
Flooded
Typical ooded (wet-) lead acid battery.
LiFePO4
Typical Lithium iron Phosphate battery (does not apply to +B2 and +B3 inputs)
