Page 33
Enerdrive ePRO Inverter / Charger Owners Manual
The battery is not
being charged up
to it’s maximum
capacity.
Incorrect absorption
charge voltage setting.
Check DIP switch 5 and 6 for
correct settings. Or adjust
the absorption voltage
using ePRO Dashboard.
Incorrect charge current setting.
Adjust the charge current
using the Universal Remote
Control or ePRO Dashboard.
Typically, the charge current
should be set to 10%-20% of
the total battery capacity
Too much voltage loss in battery
cables and/or connections.
Make sure that the battery
cables have a large enough
diameter. Check if all DC
connections are solidly made.
Additional battery loads
are consuming too much
current during charging.
Turn-o
ff
or disconnect
all battery loads.
Charge current
is too low.
High ambient temperature.
Try to lower the ambient
temperature around
the ePRO Combi.
Charger is operating in the
absorption charging stage.
Do nothing. The battery is
almost fully charged and
consumes less current by itself.
