Enerdrive DOMETIC EN43510, Руководство пользователя, Страница: 18 / 30

Load Working Mode 4
Operation:
Step 1: Press the button and hold 5s under the load mode interface.
Step 2:
Press the button when the load mode interface is flashing, to cycle through the load
settings.
Step 2: Press the button to confirm the load mode.
NOTE: Please refer to chapter 4.2 for the load working modes.
4. PARAMETERS SETTING
4.1 SUPPORTED BATTERY TYPES
1.
Battery
Sealed (default)
Gel
Flooded
LiFePO4(4S/8S)
Li(NiCoMn) O2 (3S/6S/7S)
Lithium
Battery
User
2.
3.
When the default battery type is selected, the battery voltage parameters cannot be modified. To
change these parameters, select the "USE" type. (Not applicable for Lithium Profiles)
NOTE
NOTE
Enerdrive only recommend to use the Lithium Ion - Li(NiMnCo)O2 battery selection when the
controller is installed in specific commercial applications only. (Battery Type NO3, NO6, NO7).
For specific charging parameters for this battery type, please contact Enerdrive.
Page 18 MPPT Solar Controller Owners Manual Rev. 1.3.
ENTER
ENTER
SELECT