Eneo TVC-2080Z03, Быстрое руководство по установке

Страница: 9 / 32

9
EN
Operating instructions
Using OSD controller
Setup menu can be accessed and controlled by OSD control joy stick on the rear of cam-
era unit. Five commands are available with the joy stick.
Description of the joystick operation
1. SET Key (
●
) : Access to the menu or enter the setting. To enter the main menu,
press the Set Key down for about 1.5sec
2. UP/DOWN Key (
▲
/
▼
) : Choose the desired sub-menu and to move the cursor up or
down.
3. LEFT/RIGHT Key (
◄
/
►
) : Set up the value of the selected menu. Used to adjust the
desired menu selection and to move the cursor left or right.
4. ‘
☟
’ denotes the long press down straightly for about 2 seconds
Description of the ZOOM&FOCUS adjustment
i
Works only when OSD Menu is inactive. Set to Pointing Zoom ON for D-Zoom
control.
1. ▲
: Zoom In
2. ▼
: Zoom Out
3. ◄ : Focus Near
4. ► : Focus Far
OSD menu startup
Press ‘
☟
’ (OSD menu SET key) down long to access the setup menu mode.
i Lens Initializing is strongly recommended at the first stage of setup menu control.
ZOOM/FOCUS > LENS INIT > Press the joystick ‘
☟
’ straight down for about 2 seconds.