Eneo PNR-5216, Руководство по эксплуатации, Страница: 82 / 160

User’s Manual
74
Playing Self-Player File
You do not need to install any special software to play video exported as a self-player file because the self-
player file contains a player program (Clip Player). Double clicking the target file starts the Player program,
and video is displayed on the screen. Clicking the slide bar at the bottom of the Player program displays
the playback image of the selected time on the screen. Clicking the
button exits the Player program.
NOTES:

It is suggested that the computer used for the Player program has at least an 800MHz Pentium III (Intel
Pentium Dual Core 2.2GHz recommended). If your CPU is slower than this, video clips recorded at maximum
speed with very high image quality will be played back slowly. Also DirectX 9.0 or higher is required to
install, and the VGA card with 16MB or higher video RAM is recommended for proper operation.

Proper image display depends on the display settings of your PC. If you are experiencing display
problems, click the right mouse button on the background screen and select Properties
→ Settings then
set the Color quality
to “
32 bit
”. Then select
Advanced
→
Troubleshoot , and then set the Hardware
Acceleration to
“
Full
”. Please make sure that DirectX version 9.0 or higher has been installed if the display
problem continues. To check the version of DirectX, click Start
→
RUN
and type “dxdiag” then hit the enter
key which will display DirectX Diagnostic Tool dialog box. Then move to the Display tab and make sure
DirectDraw Acceleration
is set to “
Enabled
”. Test DirectDraw by selecting the
DirectDraw Test button
when using the Microsoft
®
Windows
®
XP operating system. Please check the driver version of the
video card and update it to the latest version available. If you still have display problems after changing
all display settings as described above, try replacing the video card. Video cards with an ATI chipset are
recommended.

If you selected the Exclude Player option when saving recorded video, you must run the Self-Player
program (ClipPlayer.exe) which is provided in the iNEX Client program installation folder (\Client\selfplayer)
to play the saved file.

: Goes to the beginning of the video.
: Goes to the end of the video.
: Plays the video in fast reverse. : Plays the video in fast forward.
: Goes backward one frame of the video. : Goes forward one frame of the video.
: Plays the video at regular speed.

: Shows the previous camera group if there is recorded video in the previous camera group based on
the current screen format.