Eneo PNR-5216, Руководство по эксплуатации, Страница: 67 / 160

Network Video Recorder
59
5. You can check the recording status in the
Device
menu. Click
All Devices
in the
Site
panel and all
registered devices are displayed in the Site List panel. Click the arrow button ( ) beside the device
name, and check the status (
Record
: During Time-Lapse recording or Event-Based recording,
Panic
:
During Instant recording,
Idle
: Ready to record). The Time-Lapse Recording or Event-Based Recording
OSD ( ) is displayed in the upper right corner of the camera screen of the Live screen in the iNEX Client
program.
Setting up Event-Based Recording
During Event or Pre-Event recording, the recording service records video based on the event detection for
the scheduled time (supported only for devices registered on one of recording services). Event related
functions may not be supported depending on the protocol that the device uses (supported for the iNEX
protocol and some versions of the ONVIF
TM
Conformance and Axis protocol).
1.
Set the schedule time by double clicking the
Time Coverage
schedule window, and then selecting a
desired Preset. The way to set up the schedule time for Event or Pre-Event recording is identical to the
way to set up for Time-Lapse recording. Refer to
Setting up Time-Lapse Recording
(p. 57) for details.
2.
Set up the recording mode to Event Recording or Pre-Event Recording by double clicking the Condition
schedule window. Then select a desired Preset of event or pre-event condition.
You can add a new Preset or edit a saved Preset by clicking
the
Add or Modify button. Clicking the Add or Modify
button displays the following setup screen.