Eneo PNR-5216, Руководство по эксплуатации, Страница: 23 / 160

Network Video Recorder
15

Recording Service : Select a recording service (supported only for the network video devices). The
device is registered on the recording service and the recording service performs recording according
to a recording schedule. The channel number of the recording service indicates the maximum number
of cameras that can be registered, and the name indicates the name of a recording service, which was
set during the Service menu setup. When selecting the
Do not record
option, the iNEX program treats
the device during the Schedule setup as though it was not registered and does not perform any of the
scheduled activities associated with the device. If you delete the device from the recording service
after some recording has been done, you cannot search or play back the previously recorded video
though you register the device again. You can check the list of devices registered on the recording
service on a
Device Setup
tab while setting up the recording service in the Service menu. Refer to
Chapter 13
— Storage Management
(p. 105) for details.

Streaming Service
: Select whether or not to use the streaming service for monitoring video from the
device. If the device uses the streaming service, the iNEX program transmits video from the device
to the client system through the streaming service, and it allows multiple users to monitor video
simultaneously. The number of channels that can be streamed equals the number of channels that
can be recorded. Refer to
Chapter 10
— Streaming
(p. 85) for details.

Apply to All Devices
: Select to apply the same user ID and password to all selected devices if you
selected more than one device and the selected devises have the same user ID and password.
NOTES:

If the device is a DVR, it might be necessary to enter the DVR port numbers depending on the specifications
and version of the DVR.

When registering a four-channel network video transmitter which uses the iNEX protocol, all four cameras
are automatically registered even if some of the four cameras are disabled.
4.
Click Device Group in the Site panel, and then the button at the bottom of the Site panel. The Add
Device Group window appears.

Name
: Enter the device group name.

Location
: Select an upper group to which the device group will belong.

Select Devices Below
,
Selected Device List
: Check the box beside cameras in the left panel, and
the selected cameras are added to the right panel.