Eneo PNR-5216, Руководство по эксплуатации, Страница: 43 / 160

Network Video Recorder
35
Screen Format

Side Pane Position, Map Sitemap Position :
Set up the position of side panels and the position
of the root map list in the Map panel.

Monitor Setup
…
: Set up the monitor connected
to the NVR system. Do NOT update the device
driver of the display adaptor when setting up the
monitor. The system might not operate properly
when doing it.

Live Default , Playback Default Map Default :
The default screen formats for the Live, Play
and Map screens are displayed. Clicking the
Format Setup
button allows you to change
the default screen format.

Change the screen format based on the
selected camera : Displays video from a
camera selected from the current screen format
in the first camera screen of the new screen
format when you change screen formats.
Screen Display

Display OSD
: Sets up the OSD display setting
and information to be displayed on a camera
screen. The
Opacity slide bar allows you to
adjust the opacity of OSD (On Screen Display),
OSD Magnification
changes the OSD size
depending on the screen size. See below about
OSD information.
−
Camera Title : Displays the camera name
set in the iNEX program.
−
Title Bar
: Separates the title display area
from an image display area at the top.
−
Status Icon
: Displays status OSD. (
(Red): During Time-Lapse or Event-Based
recording,
(Orange): During Instant
recording, : In the PTZ mode, : In the
camera sequence mode, : In the zoom mode,
: In the two-way audio communication
mode)
−
PTZ : Displays direction control buttons which is displayed on the camera screen when controlling
a PTZ camera.
−
Date
,
Time
: Displays the date and time of the NVR system.
−
Event Alert
: Highlights the camera title bar in red when an event occurs in the device. The alert will
release after the event dwell time (sec.) from the time an event is detected or when you select the camera
screen if you set up the Event Alert Dwell Time setting to
Manual Off .
−
Motion Block : Displays the area where motion is detected with red blocks when a motion detection
event occurs in the device (supported only for network video transmitters which use the iNEX protocol).
−
Text-In
: Displays the text-in information on the screen when a text-in event occurs in the device
(single-screen format only). This feature is supported only for devices which use the iNEX protocol.

Control Toolbar
: Adjusts the opacity of the control toolbar on the camera screen.