Operation Guide
4 OSD Setting
17
:
Press this button to move the cursor to the previous character. Press the
UP
,
DOWN
,
LEFT
, and
RIGHT
buttons to select
, and press the
OK
button to move the cursor
backward by one character. If you press the
OK
button again, the cursor continues to move
backward by one character. Move the cursor to the character to be modified, select the correct
character, and press the
OK
button. Then the original character is replaced by the selected
character.
:
Press this button to move the cursor to the next character. Press the
UP
,
DOWN
,
LEFT
,
and
RIGHT
buttons to select
, and press the
OK
button to move the cursor forward by
one character. If you press the
OK
button again, the cursor continues to move forward by one
character. Move the cursor to the character to be modified, select the correct character, and
press the
OK
button. Then the original character is replaced by the selected character.
CLR
: Press the
UP
,
DOWN
,
LEFT
, and
RIGHT
buttons to select
CLR
to clear the camera
title.
POS
: Press the
UP
,
DOWN
,
LEFT
, and
RIGHT
buttons to select
POS
to complete the
setting or modification of the camera title.
END
: Press the
UP
,
DOWN
,
LEFT
, and
RIGHT
buttons to select
END
to return to the OSD
setup interface.
Procedure
Step 1
Press the
UP
,
DOWN
,
LEFT
, and
RIGHT
buttons to select numbers, letters, or symbols.
Step 2
Select a character and press the
OK
button to confirm the selection.
Step 3
Repeat Steps 1 and 2 to set the camera title.
Step 4
Press the
UP
,
DOWN
,
LEFT
, and
RIGHT
buttons to select
POS
to complete the camera
title setting. Open the real-time video interface, which displays the camera title.
----End
4.7.2 D-EFFECT
Press the
UP
or
DOWN
button to select
D-EFFECT
, and press the
OK
button to open the
D-
EFFECT
interface, as shown in Figure 2-16.
