Operation Guide
4 OSD Setting
15
Figure 4-13
NR
interface
Procedure
Step 1
Press the UP or DOWN button to select 2DNR, and press the LEFT or RIGHT button to set
this parameter.
Step 2
Press the UP or DOWN button to select 3DNR, and press the LEFT or RIGHT button to set
this parameter.
Step 3
Press the UP or DOWN button to select RETURN, and press the OK button to return to the
OSD setup interface.
----End
4.7 SPECIAL
Press the
UP
or
DOWN
button to select
SPECIAL
, and press the
OK
button to open the
SPECIAL
interface, as shown in Figure 2-14.
