Operation Guide
4 OSD Setting
14
Figure 4-12
D&N AUTO
interface
Procedure
Step 1
Press the UP or DOWN button to select D->N (AGC), and press the LEFT or RIGHT button
to set this parameter.
Step 2
Press the UP or DOWN button to select D->N (DELAY), and press the LEFT or RIGHT
button to set this parameter.
Step 3
Press the UP or DOWN button to select N->D (AGC), and press the LEFT or RIGHT button
to set this parameter.
Step 4
Press the UP or DOWN button to select N->D (DELAY), and press the LEFT or RIGHT
button to set this parameter.
Step 5
Press the UP or DOWN button to select RETURN, and press the OK button to return to the
OSD setup interface.
----End
4.6 NR
You can set the
NR
parameter to reduce the noise level of an image. The options are
2DNR
and
3DNR
.
Press the
UP
or
DOWN
button to select
NR
, and press the
OK
button to open the
NR
interface, as shown in Figure 2-13.
