Eneo IPB-75M3610M0A Скачать руководство пользователя страница 60

Страница: 60 / 64

1) Maintain:

Provides software reset of the camera when troubleshooting.

- The boot protocol (DHCP or static)

- The static IP address

- The default router

- The subnet mask

- The system time
> Default: The Default button should be used with caution. Pressing this returns

the camera’s settings to the factory default values including the IP address.

Do not disconnect power to the unit during the upgrade.

The unit restarts automatically after the upgrade has completed.(2~3 min.)

> Restart: The camera is restarted without changing any of the setting. Use this

method if the unit is not behaving as expected.

> Reset: The unit is restarted and most current settings are reset to factory default

values, but the following settings does not reset.

3-6-5. Maintenance

2) Upgrade:

Provides the latest firmware into this camera. When you upgrade the firmware

with a file, your camera receives the latest available functionality and unparalleled

reliability.
To Upgrades the new firmware:

Drop the file or click to the ‘Drop file here or click to upload’ then click the ‘Upgrade’

button.

[ NOTE ]

Do not disconnect power to the unit during the upgrade.

The unit restarts automatically after the upgrade has completed.(2~3 min.)

[ NOTE ]

Setup Export and Import function can only be used on the same unit with running

the same firmware. This feature is not intended for the configuration of multiple

units or for firmware upgrades.

3) Setup Export:

Save all parameters and user-defined scripts to a backup file. Click the Backup

button to take a backup of all the parameters, and any user-defined script.

4) Setup Import:

Use a saved backup file to return the unit to a previous configuration.

Drop the file or click to the ‘Drop file here or click to upload’ then click the ‘Import’

button.

Full Menu Setup

Содержание IPB-75M3610M0A

































































Результаты поиска

Содержание IPB-75M3610M0A

Отзывы:

Похожие инструкции для IPB-75M3610M0A

Бренды по названию

Популярные бренды

Eneo IPB-75M3610M0A, Руководство пользователя

Результаты поиска

Содержание IPB-75M3610M0A

Отзывы:

Похожие инструкции для IPB-75M3610M0A

Бренды по названию

Популярные бренды