Eneo IPB-75M3610M0A Скачать руководство пользователя

Страница: 53 / 64

[ NOTE ]

To add a subnet of network addresses, these must be added in CIDR (Classless

Inter-Domain Routing) notation. For example: entering 192.168.1.0/24 will add all

the addresses in the range 192.168.1.1 to 192.168.1.254. Please contact with your

network administrator for more detail.

- If you are accessing the network camera via a proxy server, the IP address for

the proxy server must be added as an allowed address.

Provides the IP filtering elements such as On/Off, Priority, Policy and IP Ranges.

The default setting is disabling.

ONVIF Authentication: Provides the ONVIF compliance.

> Enable IP filtering:

Click the Enable IP filtering checkbox to enable the IP address filtering function.

This dialog allows you to add new allowed/denied IP addresses. These can be

added whole ranges (subnets) of IP address can be added directly.

> On/Off: Click the checkbox to active the settings (Priority, Policy, and IP ranges).

> Priority:

The number means a priority if there are duplicated IP address each IP ranges.

> Policy: Determines the filtering attribute of the IP address selected.

> Start IP: Enters the start IP address to ALLOW/ DENY in the IP range selected.

> End IP: Enters the end IP address to ALLOW/ DENY in the IP range selected.

●

IP Filter

●

ONVIF

Full Menu Setup

Содержание IPB-75M3610M0A

































































Результаты поиска

Содержание IPB-75M3610M0A

Отзывы:

Похожие инструкции для IPB-75M3610M0A

Бренды по названию

Популярные бренды

Eneo IPB-75M3610M0A, Руководство пользователя

Результаты поиска

Содержание IPB-75M3610M0A

Отзывы:

Похожие инструкции для IPB-75M3610M0A

Бренды по названию

Популярные бренды