Eneo Fastrax III EDC-3182 Скачать руководство пользователя страница 26

Страница: 26 / 44

• AE CONTROL

MODE

AE / AE (DSS) / AE (DAWN) / AE (DARK) / IRIS PRIO / SHUTTER PRIO / AGC PRIO

AE:

Automatic Exposure (available motion detection).

AE (DSS):

Automatic Exposure with the DSS

AE (DAWN): Under the low light condition when night shot mode is AUTO, IR cut filter is automatically turned On and Off.

AE (DARK):

IR cut filter is automatically turned On and Off, more dark condition than AE (DAWN).

DSS LIMIT

Digital Slow Shutter Limit

/ (.5), /4 (3),/8 (6), /5 (), /30 (5), OFF

IRIS

F.4 / F / F.8 / F4 / F5.6 / F8 / F / F6 / F / F3

GAIN

0 / 6 / / 8 / 4 / 30 DB

SHUTTER

/ (.5), /4 (3),/8 (6) ... /4000, /0000, /30000

IRIS OFFSET

Set the overall brightness of a picture (000 ~ 55, default:

106

Increase the value to brighten the scene. Decrease the level to darken the scene.

This is helpful when the scene is too bright or too dark.

IRIS PEAK

Set the effect of focusing peak, or how video peaks affect the overall picture brightness. (000-7, default :

016

)

When the scene have bright lights such as spotlight or headlight, if you set Iris peak level high, the image get dark because of the

effect of focusing peaks. Overall picture darkens.

If you set Iris peak level low, the image has no effect of focusing peak and the image of spot lights get white.

Overall picture remains but spot light become very bright.

When you set Iris offset level low in an image with spotlights, a soft image may occurs because of the image of on and around the

spotlights get saturated.

BACK LIGHT

Objects in front of bright backgrounds will be clearer with BLC ON.

NOTE: When ON, WDR will be disabled.

BACK LIGHT LEVEL

0 ~ 55

NIGHT SHOT

AUTO, ON, OFF, GLOBAL

The NIGHT SHOT option removes the IR cutoff filter of the camera and makes the camera sensitive to near infrared.

AUTO

Camera goes in to B&W mode at low light.

GLOBAL Controlled by the keyboard

The operator can enable NIGHT SHOT for all dome cameras at the same time.

If the NIGHT SHOT mode is set to GLOBAL, „999” +

ENTR

will turn Off the NIGHT SHOT mode and „888” +

ENTR

will

turn On the NIGHT SHOT mode.

B/W mode

OFF

Colour mode

NOTE: The Night Shot function is controllable only AE, AE(DSS), and Priority (Shutter/Iris/AGC) mode.

WDR

ON, WDR, WDR

NOTE: Values in ( ) are for PAL Camera.

AE SETUP

MODE:

AE (DAWN)

DSS LIMIT:

IRIS:

AUTO

GAIN:

AUTO

SHUTTER:

/60

IRIS OFFSET:

IRIS PEAK:

BLC:

OFF

BLC LEVEL:

030

NIGHT SHOT:

OFF

WDR:

OFF

SAVE AND EXIT (ESC TO CANCEL)

Содержание Fastrax III EDC-3182













































Результаты поиска

Содержание Fastrax III EDC-3182

Отзывы:

Похожие инструкции для Fastrax III EDC-3182

Бренды по названию

Популярные бренды

Eneo Fastrax III EDC-3182, Инструкция по установке и эксплуатации

Результаты поиска

Содержание Fastrax III EDC-3182

Отзывы:

Похожие инструкции для Fastrax III EDC-3182

Бренды по названию

Популярные бренды