38
39
LAN Setup Screen
LAN Setup screen
Highlight the box beside
Type
and press the
button to select from
Manual, DHCP
and
ADSL (PPPoE)
.
Selecting
Manual
from the Type allows you to set up LAN parameters manually.
NOTE: You will need to get the appropriate IP Address, Gateway and Subnet Mask from your network administrator.
Change the numbers by highlighting them and use the arrow buttons or Jog Dial to increase or decrease the number.
The factory default LAN settings are:
IP Address:
192.168.1.129
Gateway: 192.168.1.254
Subnet Mask:
255.255.255.0
Highlight the box beside D
NS Server
and press the
button to enter the IP address of the DNS server. If you set up the DNS Server, the domain name of
the DVRNS server instead of the IP address can be used during the DVRNS Server setup. Refer to the
DVRNS Setup
section for details.
Highlight
Port Number Setup...
and press the
button. The
Port Number Setup
screen appears.
Port Number Setup screen
NOTE: You will need to get the appropriate Port Number for each RAS related program (Admin, Watch, Search and Callback) from your network
administrator.
Change the number by highlighting it and using the
Up
and
Down
arrow buttons to increase or decrease the number.
The factory default Port settings are:
Remote Admin:
8200
Remote Watch:
8016
Remote Search:
10019
Remote Callback:
8201
NOTE: The system restarts automatically after changing the port settings.