22
23
Motion Detector
Motion Detector setup screen
Your DVR has built-in video motion detector. Video motion detector can be turned On or Off for each camera.
Highlighting the box under the
Sensitivity
heading allows you to adjust the DVR’s sensitivity to motion. There are five settings with 1 being the least sensitive
and 5 being the most sensitive.
You can define the area of the image where you want to detect motion; e.g., a doorway. Highlight the icon under the
Zone
heading, and press the
button. The
Motion Detection Zone
screen will display.
Motion Detection Zone screen
The
Motion Detection Zone
screen is laid over the video for the selected camera. You can set up motion detection zones by selecting or clearing blocks.
The menu on the setup screen has the following functions:
NOTE: You can activate or deactivate 4 cells at a time using the
button. Once 4 cells are highlight, you can select individual cells in it using
each camera number buttons.
Exit with save - Closes the menu after saving the changes.
Exit without save - Closes the menu without saving the changes.
Select All blocks - Activates all blocks to detect motion.
Clear All blocks - Deactivates all blocks so that they will not detect motion.