Eneo DLR-2104/1.0TBV Скачать руководство пользователя страница 49

Страница: 49 / 90

Digital Video Recorder

NOTE: Selecting

Auto

will only be enabled when the DVR is configured for DHCP or an ADSL network.

Selecting

ADSL (with PPPoE)

allows you to set up the ADSL network.

Highlight the box beside

and press the

button. A virtual keyboard appears allowing you to enter the ID for

ADSL connection.

Highlight the box beside

Password

and press the

button. A virtual keyboard appears allowing you to enter the

password for ADSL connection.

NOTE: Entering

the

and

Password

and highlighting

reads the current IP address of the DVR configured

by the ADSL network.

If the DVR is configured for DHCP or an ADSL network, the IP address of the DVR might change whenever
the unit is turned on.

FEN

Figure 28: Network – FEN setup screen.

Highlight

Use FEN

and press the

button to toggle between On and Off.

NOTE: FEN is the technology that automatically sets up your DVR to work seamlessly for remote viewing via

your network internet connection. For FEN to work, naming your DVR will be required.

Highlight the box beside

FEN Server

and press the

button. A virtual keyboard appears allowing you to enter

the IP address or domain name of the FEN server.

NOTE: You will need to get the IP Address or domain name of the FEN Server from your network administrator.

You can use the domain name instead of IP address if you already set up the DNS Server when setting
up the LAN.

Highlight the box beside

Port

and press the

button. Set the port number of the FEN server using the

and

Down

arrow buttons to increase or decrease the numbers.

Highlight the box beside

FEN Name

and press the

button. A virtual keyboard appears allowing you to enter

the DVR name to be registered on the DVRNS (DVR Name Service) server.

Highlight the

Check

box and press the

button to check whether or not the name you entered can be used.

NOTE: The FEN Name you entered should be checked by selecting Check, otherwise the FEN changes will not

be saved.

When entering no name or a name already registered on the DVRNS server, an error message displays.

Содержание DLR-2104/1.0TBV



























































































Результаты поиска

Содержание DLR-2104/1.0TBV

Отзывы:

Бренды по названию

Популярные бренды

Eneo DLR-2104/1.0TBV, Руководство по эксплуатации

Результаты поиска

Содержание DLR-2104/1.0TBV

Отзывы:

Бренды по названию

Популярные бренды