Eneo DLR-2104/1.0TBV, Руководство по эксплуатации

Страница: 30 / 90

User’s Manual
22
User
Figure 10: System – User setup screen.
The +/– column is used to collapse and expand user groups. If there is a + or – in this column, it indicates the item is
a Group Name. If there is a – in front of the Group Name, it indicates that the group has been “expanded” and all of
the User Names within that group are displayed below the Group Name. If there is a + in front of the Group Name, it
indicates that the group has been “collapsed” and all of the User Names within that group are hidden. To collapse or
expand a group, highlight the
+/– column in front of the desired group and press the
button.
Highlighting a Group Name and pressing the
button allows you to change the authority levels assigned to the group.
CAUTION: Write down the new password and save it in a secure place. If the password is forgotten,
the unit must be reset using the Factory Reset Button and all data settings will be lost.
Highlighting a User Name and pressing the
button allows you to add or change the password assigned to that
user. You can also change the group to which the user is assigned.
The column can be used to delete a User Name or an entire Group. If the is grayed out, that Group or User cannot
be deleted. Highlight the and press the
button. You will be asked to confirm that you want to delete the User
or Group. To delete the User currently logged into the DVR on a local system or a PC running RAS, log the user out
of the system first and then delete the user.
To add a Group, highlight the + Group… box and press the
button. A virtual keyboard appears allowing you to
enter the Group name. You can use up to 15 characters including spaces in the group name. Enter the name and assign
authority levels to the group.