Enelion Wallbox Adspace, Инструкция по сборке

Страница: 16 / 22

Wallbox Adspace - Assembly manual 8 - 2021
Fig. 23: Incoming and outgoing communi-
cation cables (variant B)
3. Release the connector terminal by pressing the
button using a flathead screwdriver and insert the
wires into the respective locations. There will be
single wires for devices at the start and end of the
network.
Fig. 24: Diagram of Enelion Chain communica-
tion cables connection (variant A)
Fig. 25: Diagram of Enelion Chain communica-
tion cables connection (variant B)
4. Use termination for devices at the beginning and
end of the network. In case of variant A place
terminating jumper on the marked headers [Fig
28].
In case of variant B termination is done
by slide the switch down, to show white square.
In alternate version, if there is no switch, place
a jumper on two pins in the header inside the
charger marked by white line [Fig. 29].
Fig. 26: Termination diagram.
Fig. 27: A sample jumper.
Fig. 28: The place of applying the terminating
jumper (variant A)
15 Connection