Enelion Energy Guard, Инструкция по сборке

Страница: 8 / 17

Energy Guard - Assembly manual 9 - 2021
o
WARNING
The location of the measuring coils should be
noticed in the Dealer Tool Box configuration.
The device should not be located in a place of high ex-
posure to sunlight, which could cause overheating. Do
not install the device near heat sources nor in the loca-
tions exposed to high humidity.
It is forbidden to install the device in explosion hazard
zone.
Before installation, make sure that the mounting space
inside the switchboard is sufficient for the device. For
more information see the
Switchboard modification .
o
WARNING
The manufacturer accepts no responsibility for
any damage resulting from failure to comply
with the above-mentioned recommendations.
7 Design indications of the installation