Enelion Energy Guard, Инструкция по сборке

Страница: 14 / 17

Energy Guard - Assembly manual 9 - 2021
6. Technical data
6.1. Enelion Energy Guard
Electrical data
Nominal supply voltage 1x 230V AC / 3x 230V AC ( +-10%)
Network type TN-C; TN-S; TN-C-S; TT
Voltage frequency 50 Hz/60 Hz
Overvoltage category III according to EN 60664–1
Maximum value of measuring current Depends on the current transformers (Home: 40 A, Busi-
ness:
100 A, 300 A, 500 A); possibility to individual
choose for higher value of current
Accuracy Accuracy class 0,5
Maximum temporary overload* 100%
Bidirectional current measurement Yes
Measurement point parameters Three or one phase system (included correct amount of
measuring coils.)
Typical reaction time from switch on to
change the charging power < 1,5 s
Maximum charging hold time 3 s, according with IEC 61296
Maximum charging station reaction time on
change of available power 5 s, (according with IEC 61296)
Maximum EnergyGuard reaction time on
higher current consumption detection 1 s
Maximum connection overload time** 9 s
Maximum connection current limitation 3 kA
*must be executed following conditions:
1. Connection was in 100% used by cars
2. At the same moment the external load has been
launched using 100% of the main connection
13 Technical data