E N D U R A P R O D U C T S > I N S T R U C T I O N S > A L L - A L U M I N U M Z - A C
™
F I E L D R E P L A C E M E N T I N S T R U C T I O N S
7
X/2
X/2
Cut 1/8
"
from each end
Cut 1/8
"
from each end
3. Install Mylar Strip(s)
(ZAI-AA to ZAC-AA)
c)
d)
Proceed to step 5
Proceed to step 5
Measure the length of the sill (X).
Measure the length of the sill (X).
Measure and mark the centerline of the Cap
CAUTION:
Measure carefully
and cut precisely within
1/32” to ensure proper
operation. A cap cut too
short will not seal correctly.
CAUTION:
Measure carefully and cut precisely within 1/32” to ensure
proper operation. A cap cut too short will not seal correctly.
5. Cut NEW Z-Articulating Cap to Length
(ZAI-AA to ZAC-AA)
a)
a)
b)
b)
x
x
Measure and cut new cap 1s to match length of the sill minus 1/4".
Sill Length (x)
1/4
"
c) Measure and cut new cap 1F to match length of the sill minus
1/8" on each side.
Cut from both ends of the cap to ensure caps
Centerline remains centered.
FOR FRENCH (DOUBLE) DOOR APPLICATIONS
FOR SINGLE, SIDELITE AND HINGED PATIO DOOR APPLICATIONS
Cut Here
If needed, move the bases at the end of the caps to the inside (1/2” from the end)
1S
1F
Cap Centerline
