EndRun Sonoma N12, Руководство пользователя

Страница: 97 / 174

S o n o m a U s e r M a n u a l 80
C H A P T E R N I N E
81 S o n o m a U s e r M a n u a l
C O N T R O L A N D S T A T U S C O M M A N D S
SENT/sec is the current rate of NTP packets being sent per second.
DROPCNT is a count of the number of NTP packets dropped since startup of the NTP daemon.
This is a 32-bit counter so it will wrap back to zero after 4,294,967,295 packets.
Below is an example of a typical response to this command:
Command:
ntpstat
Sonoma reply:
20170117.00:02:40 -0.000000051 129127988 129015079 1594.4/sec 15
oscctrlstat
This command displays the current values of the system oscillator control parameters. These param-
eters are related to the disciplined system oscillator. The command formats the data and prints this
fixed-length string having these fields:
YYYYMMDD.HH:MM:SS LKSTAT COAST ESTERR MEASERR TIMEDEV AGERATE TAU EFCDAC TEMP
Where:
YYYY is the year of the UTC timestamp of the most recent update received from the
GPS Subsystem.
MMDD is the month and day-of-month of the UTC timestamp of the most recent update
received from the GPS Subsystem.
HH:MM:SS is the hour, minute and second of the UTC timestamp of the most recent update
received from the GPS Subsystem.
LKSTAT is the GPS Subsystem control status, either WRM (warming up),
ACQ (acquiring), LKG (locking) or LKD (locked).
COAST is the number of seconds the GPS Subsystem has been in coast mode
(unlocked to GPS).
ESTERR is the estimated time error of the GPS Subsystem when in coast mode, in
seconds.
MEASERR is the last measured time offset of the GPS Subsystem to GPS while locked, in
seconds.
TIMEDEV is the time deviation (TDEV) of the offset measurements in seconds. The tau
associated with this measurement is one second, which is the update interval
of the position fixes received from the GPS Receiver.
AGERATE is the regression-computed system oscillator ageing rate per day (several-hour
delay before the first measurements are displayed).