EndRun Sonoma N12, Руководство пользователя

Страница: 132 / 174

S o n o m a U s e r M a n u a l 116
A P P E N D I X B
You may transfer the file to your Sonoma using either
ftp
or
scp
. If you are using
ftp
to perform
the upgrade, transfer the previously downloaded file using
binary
transfer mode from the remote host
to this specific file on your Sonoma: /tmp/rcvrfpga.rbf . The FPGA image will be named with the
image part number and version like:
6020-0014-000_02.rbf
. When following the instructions below,
substitute the name of the actual FPGA image that you are installing for 6020-0014-000_02.rbf . You
will be transferring the file to a temporary file,
/tmp/rcvrfpga.rbf
on your Sonoma.
ftp remote_host
{ perform ftp login on remote host }
bin
{set transfer mode to binary}
get 6020-0014-000_02.rbf /tmp/rcvrfpga.rbf
{transfer the file}
quit
{
close the ftp session after the transfer
}
If you are using SSH to perform the EndRun GPS Receiver upgrade, you may open another com-
mand window on the remote computer and securely transfer the FPGA image to
/tmp/fpga.bin
using
scp
from the remote computer. A command like this could be used:
scp –p 6020-0014-000_02.rbf root@host.your.domain:/tmp/rcvrfpga.rbf
Now issue the following command to the Sonoma console to initiate the upload:
upgradercvrfpga
This command performs the file transfer to the FPGA on the EndRun GPS Receiver. You will see a
file transfer progress message while it is performing the transfer. Next, issue the following command
to the Sonoma console to reset the GPS Subsystem (and Receiver):
subsysreset
After it completes, wait about 60 seconds and issue this command to check the FPGA version on the
GPS Receiver:
rcvrversion
You should see a message like this:
F/W 6010-0081-000 Ver 1.04 - FPGA 6020-0014-000 Ver 02 - OCT 11 13:08:52 2015
The FPGA version should match that of the binary file that you uploaded.