64
ESE 807 / 1107 / 1307 / 1407 DBG (ES) DIN
Status at:
February 2013
2.
Reinsert the dipstick and take it out again. Drain off some
of the oil if the level is above the upper mark and refill
with oil if the level is under the lower mark.
The oil level has been checked.
Pour in oil as follows:
1.
Remove oil screw plug
(Fig. 6-1-(1))
. Pull out the dipstick
for easier filling (
(Fig. 6-1-(2))
.
2.
Fill with oil using a filling aid.
3.
Check oil level and add oil if necessary.
The engine has been refilled with oil.
Fig. 6-2: Change the oil
Refilling with oil
Содержание ESE 1107 DBG DIN
