Endress ESE 1107 DBG DIN, Руководство по эксплуатации

Страница: 33 / 77

Status at: February 2013 ESE 807 / 1107 / 1307 / 1407 DBG (ES) DIN
33
4
Operating ESE 807 - 1407 DBG (ES) DIN
The operation of the generator is described in this section.
Transporting the generator
4.1
Proceed as follows to transport the generator.
The following requirements must be met:

The generator must be turned off

The generator must have cooled down.

The installed fuel valve is in the “OFF” position

The fuelling device (a special accessory see 3.1.4.2) is
disconnected

Exhaust hose (a special accessory see 3.1.4.2) is not
attached

At least one person per carrying handle
WARNING!
A slipping or falling device can crush hands or feet.

Take the weight into account
— about
130 / 150 kg.

Carry the alternator using at least one person per carry-
ing handle.

Only lift the alternator by the carrying handles.

Lift / lower the alternator evenly.

Walk slowly.
1. Unfold carrying handles.
2. Lift generator evenly.
3. Carry the generator to the work site.
4. Lower generator evenly.
5. Fold carrying handles.

The generator has been carried to its work site.
Setting up the generator
4.2
Proceed as follows to set up the generator.
Requirements
Carrying the generator