Maintenance
Maintenance
work
Status at: April 2016
47
Figure 7-1: Drain the oil.
Screw off the oil cap
(seeFigure 3-2 (3))
.
1.
Disassemble the side plate
(seeFigure 7-1-(3))
and the cov-
2.
ering stoppers
(see Figure 7-1-(2))
on the exhaust gas side
of the device.
Guide the drain hose
(seeFigure 7-1 (1))
through the open-
3.
ing in the frame and set the oil collection pan in place.
If present, screw down the oil drain valve cap on the un-
4.
derside of the engine
(seeFigure 7-1 (1))
.
Put the oil collection pan in place. Screw the drain hose
5.
onto the oil drain valve on underside of the engine. The
valve opens and the motor oil flows into the collection
tray.
The motor oil has been drained.
Drain the oil.
