Monitoring
the operating status using the multifunction display
Switch
off generator with E-MCS 5.0
Status at: April 2016
41
2.
Press the STOP button
(Figure 11-1)
once; the red LED
begins to flash. The engine stops after the cooling run-on
period.
3.
Press the STOP button
(Figure 11-1)
a second time; the
engine stops immediately without a cooling run-on period
(not recommended).
The engine is stopped.
The generator cannot be started manually in AUTO mode.
WARNING!
We request that you only switch off the device using the
EMERGENCY-STOP switch in an emergency.
NOTE